Mold Temperature Controller
General Description
AMTC Series mold temperature controllers are mainly used to control temperature of mould in plastic injection molding industry and temperature of extrusion molding industry. The machine equipped with special designed heating and cooling unit to provide a stable temperature for the injection mould. The water type mould temperature controller can provide maximum temperature at 120℃; while oil type mold temperature controller can provide maximum temperature at 200℃.
Features
l High quality water pump and oil pump provide high pressure and stable performance
l Compact structure, elegant appearance
l Stainless steel water tank and pipe insures good quality water
l High precise PC and temperature controller provide stable temperature for injection mold
l Overload protector to protect water pump and oil pump
l Easy installation, operation and maintenance
Specifications
Model | Maximum Temperature (°C) | Cooling Method | Heater Power (kw) | Pump Mold (kw) | Maximum Flow Rate (L/min) | Max Pressure (Bar) | Mould Connector (Inch) | External Size HxWxL (mm) | Weight (kg) |
AMTC-6-W | Water Type （120） | Direct Cooling | 6 | 0.37 | 30 | 3.5 | 3/8" (2x2) | 650x300 x750 | 60 |
AMTC-9-W | 9 | 0.75 | 45 | 3.5 | 3/8" (2x2) | 650x300 x750 | 65 | ||
AMTC-12-W | 12 | 1.5 | 75 | 5.5 | 3/8" (4x2) | 700x300 x750 | 90 | ||
AMTC-6-WD | 6x2 | 0.37x2 | 30x2 | 3.5 | 3/8" (2x2x2) | 650x600 x750 | 100 | ||
AMTC-9-WD | 9x2 | 0.75x2 | 45x2 | 3.5 | 3/8" (2x2x2) | 650x600 x750 | 110 | ||
AMTC-12-WD | 12x2 | 1.5x2 | 75x2 | 5.5 | 3/8" (4x2x2) | 700x600 x750 | 145 | ||
AMTC-6-O | Oil Type (200) | Indirect Cooling | 6 | 0.37 | 30 | 3.5 | 3/8" (2x2) | 650x300 x750 | 65 |
AMTC-9-O | 9 | 0.75 | 45 | 3.5 | 3/8" (2x2) | 650x300 x750 | 75 | ||
AMTC-12-O | 12 | 1.5 | 75 | 5.5 | 3/8" (4x2) | 800x350 x750 | 90 | ||
AMTC-6-OD | 6x2 | 0.37x2 | 30x2 | 3.5 | 3/8" (2x2x2) | 650x600 x750 | 110 | ||
AMTC-9-OD | 9x2 | 0.75x2 | 45x2 | 3.5 | 3/8" (2x2x2) | 650x600 x750 | 120 | ||
AMTC-12-OD | 12x2 | 1.5x2 | 75x2 | 5.5 | 3/8" (4x2x2) | 800x700 x750 |
155 | ||
The reference for mould automatic temperature control machine selection | |||||||||
Mould clamping force of plastic injection machine(T) | 50 below | 50-100 | 100-200 | 200-300 | 300-650 | 650 above | |||
Molding capacity (kg/hr) | 6 below | 6-12 | 12-25 | 25-40 | 40-80 | 80 above | |||
The flow of pump(L/min) | 30 | 30 | 30 | 40 | 60 | 100 | |||
Please excuse for not note if some specifications of products are changed.
Note：
1) "D" is double section.
2) The Voltage Specification of Machine is 3Ø,220/380V,50/60HZ.
The voltage can be changed as you require.
3) "W" indicate water-type controller; "O" indicate oil-type controller.
Copyright © 2016 Aumax Industrial (HK) Limited. All Rights Reserved Link: Plastic Crusher Plastic Granulator Plastic Shredder
