LA-650JXB
Product details
Horizontal rotation mechanism
The rotation mechanism is convenient to adjust when the placement direction is changed, only by adjusting the screw. With the rotation mechanism, the fixture can rotate 90° and places the finished product.
Mold change adjusting mechanism
The fixed handle needs to be loosened during mold change. The mechanism can rotate 90° to improve the mold change efficiency.
Fixture loop
It can be used for absorbing the multi-cavity finished product and clamping the water gap.
Arm structure
1. The light-weight and high-rigidity aluminum alloy structure beam is matched with a linear bearing and a high-rigidity bearing steel guide rail.
2. Light structure, good wear resistance, no deformation, small vibration, long service life
3. All-mechanical aluminum alloy structure
Mode | LA-600FJXB |
I.M.M.rarIge(T) | 50-150T |
Vertical stroke(mm) | P:600/R:600 |
Crosswise stroke(MM) | P:75/R:75 |
Swing AngLe() | 3 |
Minimumtaketime(sec.) | 2 |
Dry cycle time(sec.) | 7 |
Air consumption(nl/cycle) | 15 |
Air power(MPa) | 0.6-0.8 |
Workingd air pressure(MPa) | 0.5 |
Power | AC220V,±10%50/60HZ |
Net weight(Kg) | 45 |
L×W xH(mm) | 1050*280*1200 |
Copyright © 2016 Aumax Industrial (HK) Limited. All Rights Reserved Link: Plastic Crusher Plastic Granulator Plastic Shredder