Air-cooled Industrial Chiller
General Description
AMC-A Series air-cooled industrial water chiller are mainly used in plastic molding industry. The machine can control the mold temperature precisely to speed up the molding time of plastic products. In addition, they can be used in electroplate industry, food industry, electronic industry, textile industry, etc. This series machine has chilling capacity ranges from 6,000 to 120,000 Kcal/h, and control water temperature between 5℃~35℃.
Features
l High quality and top brand compressor, water pump, air fans provide a stable performance
l Special designed condenser and heater exchanger insure high efficiency
l Stainless steel water tank and pipe insures good quality water
l High precise PC and temperature controller keep the temperature deviation less than ±1℃
l Overload protector to protect water pump, compressor and air fans
Specifications:
Model | AMC-3A | AMC-4A | AMC-5A | AMC-8A | AMC-10A | AMC-12A | AMC-15A | AMC-20A | AMC-25A | AMC-30A | |||||||||
Chilling capacity | Kw | 7.5 | 10 | 13.5 | 20 | 25.5 | 31.5 | 38.5 | 50 | 62.5 | 77.5 | ||||||||
Kcal/hr | 6500 | 9000 | 11500 | 16500 | 22000 | 27000 | 33000 | 44000 | 54000 | 66500 | |||||||||
Compressor Power | HP | 3 | 4 | 5 | 8 | 10 | 12.5 | 15 | 20 | 25 | 30 | ||||||||
Refrigerant | - | R22 / R407C | |||||||||||||||||
Evaporator | - | Stainless-steel Plate Type | |||||||||||||||||
Blower power | Kw | 0.25 | 0.19x2 | 0.25x2 | 0.42x2 | 0.25x4 | 0.42x4 | 0.42x6 | |||||||||||
Tank capacity | L | 50 | 65 | 110 | 120 | 170 | 270 | 350 | 400 | ||||||||||
Pump power | Kw | 0.75 | 1.5 | 2.2 | 2.2 | ||||||||||||||
Pump max. Flow-rate | L/min | 100 | 200 | 250 | 400 | ||||||||||||||
Pump max. pressure | Kg/cm² | 2.0 | |||||||||||||||||
Pipe size outlet | Inch | 1" | 1.5" | 2" | |||||||||||||||
Pipe size inlet | Inch | 1" | 1.5" | 2" | |||||||||||||||
Drainage outlet | Inch | 1/2" | |||||||||||||||||
Overflow port | Inch | 1/2" | |||||||||||||||||
Weight | Kg | 220 | 260 | 280 | 350 | 450 | 530 | 550 | 700 | 750 | 780 | ||||||||
Dimension : | |||||||||||||||||||
L | mm | 1090 | 1250 | 1350 | 1350 | 1700 | 1900 | 2150 | |||||||||||
W | 760 | 760 | 860 | 960 | 1200 | 1200 | 1480 | ||||||||||||
H | 1250 | 1320 | 1560 | 1620 | 1750 | 1750 | 1800 |
Please excuse for not note if some specifications of products are changed.
Note:
1)The cooling capacity is measured when the outgoing water temperature is 12°C and ambient temperature is 30°C.
2) The standard voltage is 3Ø, 380V, 50HZ. We also can make it as you requirements.
Copyright © 2016 Aumax Industrial (HK) Limited. All Rights Reserved Link: Plastic Crusher Plastic Granulator Plastic Shredder